3Com 8760 User Guide - Page 120

CHAPTER 5: COMMAND LINE INTERFACE Command Mode Interface Configuration (Ethernet) Command Usage • The access point supports Secure Shell version 2.0 only. • After boot up, the SSH server needs about two minutes to generate host encryption keys. The SSH server is disabled while the keys are being generated. The show system command displays the status of the SSH server. Example Enterprise AP(if-ethernet)#ip ssh-server enable Enterprise AP(if-ethernet)# ip ssh-server port This command sets the Secure Shell server port. Use the no form to disable the server. Syntax ip ssh-server port port-number - The UDP port used by the SSH server. (Range: 1-65535) Default Setting 22 Command Mode Interface Configuration (Ethernet) Example Enterprise AP(if-ethernet)#ip ssh-server port 1124 Enterprise AP(if-ethernet)# ip telnet-server enable This command enables the Telnet server. Use the no form to disable the server. Syntax ip telnet-server enable no ip telnet-server Default Setting Interface enabled 5-18