3Com 8760 User Guide - Page 176
x-supplicant enable, 802.1x-supplicant user
UPC - 662705506531
View all 3Com 8760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 176 highlights
CHAPTER 5: COMMAND LINE INTERFACE Example Enterprise AP(config)#802.1x session-timeout 300 Enterprise AP(config)# 802.1x-supplicant enable This command enables the access point to operate as an 802.1X supplicant for authentication. Use the no form to disable 802.1X authentication of the access point. Syntax 802.1x-supplicant enable no 802.1x-supplicant Default Disabled Command Mode Global Configuration Command Usage A user name and password must be configured first before the 802.1X supplicant feature can be enabled. Example Enterprise AP(config)#802.1x-supplicant enable Enterprise AP(config)# 802.1x-supplicant user This command sets the user name and password used for authentication of the access point when operating as a 802.1X supplicant. Use the no form to clear the supplicant user name and password. Syntax 802.1x-supplicant user no 802.1x-supplicant user • username - The access point name used for authentication to the network. (Range: 1-32 alphanumeric characters) • password - The MD5 password used for access point authentication. (Range: 1-32 alphanumeric characters) 5-74