3Com 8760 User Guide - Page 82
b/g Interface, Configuring Common Radio Settings
UPC - 662705506531
View all 3Com 8760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
CHAPTER 4: SYSTEM CONFIGURATION 802.11B/G INTERFACE The IEEE 802.11g standard operates within the 2.4 GHz band at up to 54 Mbps. Also note that because the IEEE 802.11g standard is an extension of the IEEE 802.11b standard, it allows clients with 802.11b wireless network cards to associate to an 802.11g access point. First configure the radio settings that apply to the individual VAPs (Virtual Access Point) and the common radio settings that apply to all of the 802.11g interfaces. After you have configured the radio settings, enable the radio service for any of the VAP interfaces, and then set an SSID to identify the wireless network service provided by each VAP. Remember that only clients with the same SSID can associate with a VAP. NOTE: You must first select a country of operation before interfaces can be enabled. Most of the 802.11g commands are identical to those used by the 802.11a interface. For information on the these commands, refer to the following sections: "Configuring Radio Settings" on page 4-36 "Configuring Common Radio Settings" on page 4-38 "Configuring Wi-Fi Multimedia" on page 4-44 Only the radio settings specific to the 802.11g interface are included in this section. To configure the 802.11g radio settings, select the Radio Settings page. 4-42