3Com 8760 User Guide - Page 147
snmp-server community, Management Protocol. Use
UPC - 662705506531
View all 3Com 8760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
Using the Command Line Interface snmp-server community This command defines the community access string for the Simple Network Management Protocol. Use the no form to remove the specified community string. Syntax snmp-server community string [ro | rw] no snmp-server community string • string - Community string that acts like a password and permits access to the SNMP protocol. (Maximum length: 23 characters, case sensitive) • ro - Specifies read-only access. Authorized management stations are only able to retrieve MIB objects. • rw - Specifies read/write access. Authorized management stations are able to both retrieve and modify MIB objects. Default Setting • public - Read-only access. Authorized management stations are only able to retrieve MIB objects. • private - Read/write access. Authorized management stations are able to both retrieve and modify MIB objects. Command Mode Global Configuration Command Usage If you enter a community string without the ro or rw option, the default is read only. Example Enterprise AP(config)#snmp-server community alpha rw Enterprise AP(config)# snmp-server contact This command sets the system contact string. Use the no form to remove the system contact information. Syntax snmp-server contact string no snmp-server contact string - String that describes the system contact. (Maximum length: 255 characters) 5-45