3Com 8760 User Guide - Page 178

CHAPTER 5: COMMAND LINE INTERFACE MAC Address Authentication Use these commands to define MAC authentication on the access point. For local MAC authentication, first define the default filtering policy using the address filter default command. Then enter the MAC addresses to be filtered, indicating if they are allowed or denied. For RADIUS MAC authentication, the MAC addresses and filtering policy must be configured on the RADIUS server. Table 21 MAC Address Authentication Command Function Mode address filter default Sets filtering to allow or deny listed addresses GC address filter entry Enters a MAC address in the filter table GC address filter delete Removes a MAC address from the filter table GC mac- authentication server Sets address filtering to be performed with local or GC remote options mac- authentication session-timeout Sets the interval at which associated clients will be GC re-authenticated with the RADIUS server authentication database show authentication Shows all 802.1X authentication settings, as well as the Exec address filter table Page 5-76 5-77 5-78 5-78 5-79 5-74 address filter default This command sets filtering to allow or deny listed MAC addresses. Syntax address filter default • allowed - Only MAC addresses entered as "denied" in the address filtering table are denied. • denied - Only MAC addresses entered as "allowed" in the address filtering table are allowed. Default allowed Command Mode Global Configuration 5-76