3Com 8760 User Guide - Page 122

CHAPTER 5: COMMAND LINE INTERFACE Command Mode Global Configuration Example Enterprise AP(config)#ip http server Enterprise AP(config)# Related Commands ip http port (5-19) ip https port Use this command to specify the UDP port number used for HTTPS/SSL connection to the access point's Web interface. Use the no form to restore the default port. Syntax ip https port no ip https port port_number - The UDP port used for HTTPS/SSL. (Range: 80, 1024-65535) Default Setting 443 Command Mode Global Configuration Command Usage • You cannot configure the HTTP and HTTPS servers to use the same port. • To avoid using common reserved TCP port numbers below 1024, the configurable range is restricted to 443 and between 1024 and 65535. • If you change the HTTPS port number, clients attempting to connect to the HTTPS server must specify the port number in the URL, in this format: https://device:port_number Example Enterprise AP(config)#ip https port 1234 Enterprise AP(config)# 5-20