3Com 8760 User Guide - Page 170
radius-server timeout-interim, radius-server radius-mac-format
UPC - 662705506531
View all 3Com 8760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 170 highlights
CHAPTER 5: COMMAND LINE INTERFACE Example Enterprise AP(config)#radius-server port-accounting 1813 Enterprise AP(config)# radius-server timeout-interim This command sets the interval between transmitting accounting updates to the RADIUS server. Syntax radius-server [secondary] timeout-interim • secondary - Secondary server. • number_of_seconds - Number of seconds the access point waits between transmitting accounting updates. (Range: 60-86400) Default Setting 3600 Command Mode Global Configuration Command Usage • The access point sends periodic accounting updates after every interim period until the user logs off and a "stop" message is sent. Example Enterprise AP(config)#radius-server timeout-interim 500 Enterprise AP(config)# radius-server radius-mac-format This command sets the format for specifying MAC addresses on the RADIUS server. Syntax radius-server radius-mac-format • multi-colon - Enter MAC addresses in the form xx:xx:xx:xx:xx:xx. • multi-dash - Enter MAC addresses in the form xx-xx-xx-xx-xx-xx. • no-delimiter - Enter MAC addresses in the form xxxxxxxxxxxx. • single-dash - Enter MAC addresses in the form xxxxxx-xxxxxx. 5-68