3Com 8760 User Guide - Page 64
Upgrading Firmware, Telnet Server, SSH Server, SSH Port - firmware upgrade
UPC - 662705506531
View all 3Com 8760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
CHAPTER 4: SYSTEM CONFIGURATION Telnet Server: Enables or disables the Telnet server. (Default: Disabled) SSH Server: Enables or disables the SSH server. (Default: Enabled) SSH Port Number: Sets the UDP port for the SSH server. (Range: 1-65535; Default: 22) UPGRADING FIRMWARE You can upgrade new access point software from a local file on the management workstation, or from an TFTP server. New software may be provided periodically from your distributor. After upgrading new software, you must reboot the access point to implement the new code. Until a reboot occurs, the access point will continue to run the software it was using before the upgrade started. Also note that new software that is incompatible with the current configuration automatically restores the access point to the factory default settings when first activated after a reboot. 4-24