3Com 8760 User Guide - Page 61

SNMP „ dot11InterfaceAFail - The 802.11a or 802.11g interface has failed. „ dot1xMacAddrAuthSuccess - A client station has successfully authenticated its MAC address with the RADIUS server. „ dot1xMacAddrAuthFail - A client station has failed MAC address authentication with the RADIUS server. „ dot1xAuthNotInitiated - A client station did not initiate 802.1X authentication. „ dot1xAuthSuccess - A 802.1X client station has been successfully authenticated by the RADIUS server. „ dot1xAuthFail - A 802.1X client station has failed RADIUS authentication. „ localMacAddrAuthSuccess - A client station has successfully authenticated its MAC address with the local database on the access point. „ localMacAddrAuthFail - A client station has failed authentication with the local MAC address database on the access point. „ sntpServerFail - The access point has failed to set the time from the configured SNTP server. CONFIGURING SNMPV3 USERS The access point allows up to 10 SNMP v3 users to be configured. Each user must be defined by a unique name, assigned to one of three pre-defined security groups, and configured with specific authentication and encryption settings. Figure 28 Configuring SNMPv3 Users User - The SNMPv3 user name. (32 characters maximum) Group - The SNMPv3 group name. (Options: RO, RWAuth, or RWPriv; Default: RO) „ RO - Read-only access. „ RWAuth - Read/write access with user authentication. „ RWPriv - Read/write access with both user authentication and data encryption. Auth Type - The authentication type used for the SNMP user; either MD5 or none. When MD5 is selected, enter a password in the corresponding Passphrase field. Priv Type - The data encryption type used for the SNMP user; either DES or none. When DES is selected, enter a key in the corresponding Passphrase field. 4-21