3Com 8760 User Guide - Page 250
WMM Commands, wmm, WMM will be used for any associated device that supports
UPC - 662705506531
View all 3Com 8760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 250 highlights
CHAPTER 5: COMMAND LINE INTERFACE • If the VLAN ID has not been configured for a client on the RADIUS server, then the frames are tagged with the default VLAN ID of the VAP interface. Example Enterprise AP(if-wireless g: VAP[0])#vlan-id 3 Enterprise AP(if-wireless g: VAP[0])# WMM Commands The access point implements QoS using the Wi-Fi Multimedia (WMM) standard. Using WMM, the access point is able to prioritize traffic and optimize performance when multiple applications compete for wireless network bandwidth at the same time. WMM employs techniques that are a subset of the developing IEEE 802.11e QoS standard and it enables the access point to inter-operate with both WMM- enabled clients and other devices that may lack any WMM functionality. The WMM commands supported by the access point are listed below. Table 31 WMM Commands Command wmm wmm-acknowledgepolicy wmmparam Function Mode Sets the WMM operational mode on the access point IC-W Allows the acknowledgement wait time to be enabled IC-W or disabled for each Access Category (AC) Configures detailed WMM parameters that apply to the IC-W access point (AP) or the wireless clients (BSS) Page 5-148 5-149 5-150 wmm This command sets the WMM operational mode on the access point. Use the no form to disable WMM. Syntax [no] wmm • supported - WMM will be used for any associated device that supports this feature. Devices that do not support this feature may still associate with the access point. • required - WMM must be supported on any device trying to associated with the access point. Devices that do not support this feature will not be allowed to associate with the access point. 5-148