3Com 8760 User Guide - Page 213

Using the Command Line Interface Example Enterprise AP(if-wireless g)#preamble short Enterprise AP(if-wireless g)# antenna control This command selects the use of two diversity antennas or a single antenna for the radio interface. Syntax antenna control • diversity - The radio uses both antennas in a diversity system. Select this method when the Antenna ID is set to "Default Antenna" to use the access point's integrated antennas. The access point does not support external diversity antennas. • left - The radio only uses the antenna on the left side (the side farthest from the access point LEDs). The access point does not support an external antenna connection on its left antenna. Therefore, this method is not valid for the access point. • right - The radio only uses the antenna on the right side (the side closest to the access point LEDs). Select this method when using an optional external antenna that is connected to the right antenna connector. Default Setting Diversity Command Mode Interface Configuration (Wireless) Command Usage The antenna ID must be selected in conjunction with the antenna control method to configure proper use of any of the antenna options. Example Enterprise AP(if-wireless g)#antenna control right Enterprise AP(if-wireless g)# 5-111