3Com 8760 User Guide - Page 151

Using the Command Line Interface - dot11StationRequestFail - A client station has failed association, re-association, or authentication. - dot1xAuthFail - A 802.1X client station has failed RADIUS authentication. - dot1xAuthNotInitiated - A client station did not initiate 802.1X authentication. - dot1xAuthSuccess - A 802.1X client station has been successfully authenticated by the RADIUS server. - dot1xMacAddrAuthFail - A client station has failed MAC address authentication with the RADIUS server. - dot1xMacAddrAuthSuccess - A client station has successfully authenticated its MAC address with the RADIUS server. - iappContextDataSent - A client station's Context Data has been sent to another access point with which the station has associated. - iappStationRoamedFrom - A client station has roamed from another access point (identified by its IP address). - iappStationRoamedTo - A client station has roamed to another access point (identified by its IP address). - localMacAddrAuthFail - A client station has failed authentication with the local MAC address database on the access point. - localMacAddrAuthSuccess - A client station has successfully authenticated its MAC address with the local database on the access point. - pppLogonFail - The access point has failed to log onto the PPPoE server using the configured user name and password. - sntpServerFail - The access point has failed to set the time from the configured SNTP server. - sysConfigFileVersionChanged - The access point's configuration file has been changed. - sysRadiusServerChanged - The access point has changed from the primary RADIUS server to the secondary, or from the secondary to the primary. - sysSystemDown - The access point is about to shutdown and reboot. - sysSystemUp - The access point is up and running. 5-49