3Com 8760 User Guide - Page 57

Filter Control A VLAN ID (1-4094) can be assigned to a client after successful IEEE 802.1X authentication. The client VLAN IDs must be configured on the RADIUS server for each user authorized to access the network. If a client does not have a configured VLAN ID on the RADIUS server, the access point assigns the client to the configured default VLAN ID for the VAP interface. NOTE: When using IEEE 802.1X to dynamically assign VLAN IDs, the access point must have 802.1X authentication enabled and a RADIUS server configured. Wireless clients must also support 802.1X client software. When setting up VLAN IDs for each user on the RADIUS server, be sure to use the RADIUS attributes and values as indicated in the following table. Number 64 65 81 RADIUS Attribute Tunnel-Type Tunnel-Medium-Type Tunnel-Private-Group-ID Value VLAN (13) 802 VLANID (1 to 4094 as hexadecimal or string) VLAN IDs on the RADIUS server can be entered as hexadecimal digits or a string (see "radius-server vlan-format" on page 5-69). NOTE: The specific configuration of RADIUS server software is beyond the scope of this guide. Refer to the documentation provided with the RADIUS server software. Figure 25 Filter Control - VLAN ID VLAN - Enables or disables VLAN tagging support on the access point. Management VLAN ID - The VLAN ID that traffic must have to be able to manage the access point. (Range 1-4094; Default: 1) 4-17