3Com 8760 User Guide - Page 215

Using the Command Line Interface Default Setting Indoor Command Mode Interface Configuration (Wireless) Command Usage • When an external antenna is selected, the antenna control must be set to "right." • Selecting the correct location ensures that the access point only uses radio channels that are permitted in the country of operation. Example Enterprise AP(if-wireless g)#antenna location indoor Enterprise AP(if-wireless g)# beacon-interval This command configures the rate at which beacon signals are transmitted from the access point. Syntax beacon-interval interval - The rate for transmitting beacon signals. (Range: 20-1000 milliseconds) Default Setting 100 Command Mode Interface Configuration (Wireless) Command Usage The beacon signals allow wireless clients to maintain contact with the access point. They may also carry power-management information. Example Enterprise AP(if-wireless g)#beacon-interval 150 Enterprise AP(if-wireless g)# 5-113