3Com 8760 User Guide - Page 236

CHAPTER 5: COMMAND LINE INTERFACE Example Enterprise AP(if-wireless g: VAP[0])#encryption Enterprise AP(if-wireless g)# Related Commands key (5-134) key This command sets the keys used for WEP encryption. Use the no form to delete a configured key. Syntax key no key index • index - Key index. (Range: 1-4) • size - Key size. (Options: 64, 128, or 152 bits) • type - Input format. (Options: ASCII, HEX) • value - The key string. - For 64-bit keys, use 5 alphanumeric characters or 10 hexadecimal digits. - For 128-bit keys, use 13 alphanumeric characters or 26 hexadecimal digits. - For 152-bit keys, use 16 alphanumeric characters or 32 hexadecimal digits. Default Setting None Command Mode Interface Configuration (Wireless) Command Usage • To enable Wired Equivalent Privacy (WEP), use the auth shared-key command to select the "shared key" authentication type, use the key command to configure at least one key, and use the transmit-key command to assign a key to one of the VAP interfaces. • If WEP option is enabled, all wireless clients must be configured with the same shared keys to communicate with the access point. • The encryption index, length and type configured in the access point must match those configured in the clients. 5-134