3Com 8760 User Guide - Page 169
radius-server timeout, radius-server port-accounting
UPC - 662705506531
View all 3Com 8760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 169 highlights
Using the Command Line Interface radius-server timeout This command sets the interval between transmitting authentication requests to the RADIUS server. Syntax radius-server [secondary] timeout number_of_seconds • secondary - Secondary server. • number_of_seconds - Number of seconds the access point waits for a reply before resending a request. (Range: 1-60) Default Setting 5 Command Mode Global Configuration Example Enterprise AP(config)#radius-server timeout 10 Enterprise AP(config)# radius-server port-accounting This command sets the RADIUS Accounting server network port. Syntax radius-server [secondary] port-accounting • secondary - Secondary server. If secondary is not specified, then the access point assumes you are configuring the primary RADIUS server. • port_number - RADIUS Accounting server UDP port used for accounting messages. (Range: 0 or 1024-65535) Default Setting 0 (disabled) Command Mode Global Configuration Command Usage • When the RADIUS Accounting server UDP port is specified, a RADIUS accounting session is automatically started for each user that is successfully authenticated to the access point. 5-67