3Com 8760 User Guide - Page 23
Checking the LEDs, Reset Button
UPC - 662705506531
View all 3Com 8760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Checking the LEDs CHECKING THE LEDS When power is connected, the access point LEDs light. The illustration and the following table describe the LEDs and their functions. Table 1 System LEDs LED Color Indicates Power Green The access point is powered up and operating normally. Off The access point is not receiving power or there is a fault with the power supply. Link Green The access point has a 10/100 Mbps Fast Ethernet connection. Flashing Indicates that the access point is transmitting or receiving data on a 10/100 Mbps Ethernet LAN. Flashing rate is proportional to network activity. Off No link is present. 11a Green The access point has WLAN frame transmission over the 802.11a 5.3 GHz radio band. Off No link is present. 11g Green The access point has WLAN frame transmission over the 802.11g 2.4 GHz radio band. Off No link is present. RESET BUTTON This button is used to reset the access point or restore the factory default configuration. If you hold down the button for less than 5 seconds, the access point will perform a hardware reset. If you hold down the button for 10 seconds or more, any configuration changes you may have made are removed, and the factory default configuration is restored to the access point. 2-9