Canon XF205 XF200 XF205 Instruction Manual - Page 102
Open the [Int. Mic Low Cut] or [MIC Low Cut] submenu.
View all Canon XF205 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Recording Audio 102 Selecting the Microphone's Low-Cut Filter The setting is separate for the built-in microphone and for an external microphone connected to the MIC terminal. 1 Open the [Int. Mic Low Cut] or [MIC Low Cut] submenu. [¡ Audio Setup] > [Audio Input] > [Int. Mic Low Cut] or [MIC Low Cut] 2 Select the desired option and then press SET. [¡ Audio Setup] [Audio Input] [Int. Mic Low Cut] [MIC Low Cut] [Off] Options [Off]: For recording audio under usual conditions. [LC1]*: For recording mainly people's voices. [LC2]*, [On]**: For reducing the background sound of wind when recording outdoors in windy surroundings (for example, on a beach or close to buildings). Note that when you use this setting some low-frequency sounds may be suppressed along with the sound of wind. * Only for [Int. Mic Low Cut]. ** Only for [MIC Low Cut]. Selecting the Built-in Microphone's Sensitivity 1 Open the [Int. Mic Sensitivity] submenu. [¡ Audio Setup] > [Audio Input] > [Int. Mic Sensitivity] 2 Select the desired option and then press SET. Options [Normal]: [High]: For recording audio under usual conditions. For recording audio at a higher volume (+6 dB). Activating the Microphone Attenuator If the audio level is too high and the sound sounds distorted when recording with the built-in microphone or an external microphone connected to the MIC terminal, activate the microphone attenuator (12 dB for the built-in microphone, 20 dB for an external microphone). 1 Open the [Int. Mic Att.] or [MIC Att.] submenu. [¡ Audio Setup] > [Audio Input] > [Int. Mic Att.] or [MIC Att.] 2 Select [On] and then press SET. [¡ Audio Setup] [Audio Input] [Int. Mic Sensitivity] [Normal] [¡ Audio Setup] [Audio Input] [Int. Mic Att.] [MIC Att.] [Off]