Canon XF205 XF200 XF205 Instruction Manual - Page 122
Pre-recording Mode, Open the [Special Recording] submenu.
View all Canon XF205 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
Special Recording Modes 122 Pre-recording Mode When pre-recording mode is activated, the camcorder starts recording continuously into a temporary memory of approximately 3 seconds so when you press the START/STOP button, the clip will contain also approximately 3 seconds of video and audio recorded before you pressed the button. Operating modes: [w Other Functions] [Special Recording] [Off] 1 Open the [Special Recording] submenu. [w Other Functions] > [Special Recording] 2 Select [Pre-Recording] and then press SET. • [PRE REC STBY] appears at the top of the screen. 3 Press the START/STOP button to begin recording. • The front and rear tally lamps illuminate. • [PRE REC STBY] changes to [Ü PRE REC] while recording. 4 Press the START/STOP button again to stop recording. • The camcorder records the clip, including approximately 3 seconds of video and audio recorded before the START/STOP button was pressed. • The tally lamps go out and [PRE REC STBY] appears at the top of the screen. NOTES • During pre-recording mode, the time code will be recorded with the running mode (A 90) set to [Free Run], regardless of the previous setting. Alternatively, you can use an external time code signal. When the time code is recorded, it will include the 3 seconds before the START/STOP button was pressed. When the special recording mode is deactivated, the running mode will return to its previous setting. • You can use only one special recording mode at a time. • Pre-recording mode will be deactivated if you change the movie format or video configuration.