Canon XF205 XF200 XF205 Instruction Manual - Page 119
Frame Recording Mode, Special Recording]
View all Canon XF205 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Special Recording Modes English • The front and rear tally lamps go out and [INT STBY] appears at the top of the screen (with [INT] flashing). NOTES • You can use only one special recording mode at a time. • The interval and the number of frames recorded cannot be changed while recording. • Some frames at the point the recording was stopped may be recorded and added to the end of the clip. • Interval recording mode will be deactivated if the special recording mode is changed or turned off. It will be deactivated also if you change the movie format or video configuration. • During this special recording mode, the time code's running mode (A 90) can be set to [Rec Run] or [Regen.] and the time code advances by the number of frames recorded. If the time code's running mode is set to [Free Run] or the time code is input from an external source, the running mode will switch to [Rec Run] during special recording mode. When the special recording mode is deactivated, the running mode will return to its previous setting. • During special recording mode, the time code signal will not be output from the TIME CODE terminal, 3G/HD-SDI terminal or MON. terminal. 119 Frame Recording Mode Set the number of frames in advance. We recommend operating the camcorder remotely or stabilizing the camcorder, for example, on a tripod. Sound is not recorded in this special recording mode. Operating modes: Configuring Frame Recording Mode 1 Open the [Recorded Frames] submenu. [w Other Functions] > [Frame Recording] > [Recorded Frames] 2 Select the desired number of frames and then press SET. • Available options depend on the frame rate used: 1, 3, 6 or 9 (23.98P, 29.97P, 59.94i), or 2, 6 or 12 (59.94P). [w Other Functions] [Frame Recording] [Recorded Frames] [1] Activating Frame Recording Mode and Recording 1 Open the [Special Recording] submenu. [w Other Functions] [w Other Functions] > [Special Recording] 2 Select [Frame Recording] and then press SET. [Special Recording] • [FRM STBY] appears at the top of the screen (with [FRM] flashing). [Off] 3 Press the START/STOP button to begin recording. • The camcorder automatically records the set number of frames. • The front and rear tally lamps illuminate. • [FRM STBY] changes to [Ü FRM REC] while recording frames and [Ü FRM STBY] when frames are not being recorded. • Repeat until you finish recording. 4 Open the [Special Recording] submenu. [w Other Functions] > [Special Recording] 5 Select [Off] and then press SET. • Frame recording mode ends and all of the recorded frames are joined together into one clip. • The tally lamps go out and [STBY] appears at the top of the screen.