Canon XF205 XF200 XF205 Instruction Manual - Page 157
Adding Shot Marks, Set an assignable button to [Add Shot Mark 1] or [Add Shot Mark 2]
View all Canon XF205 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
Clip Operations English Adding Shot Marks You can add shot marks (", # or both) to shots in an MXF clip you want to set apart. Later, you can display an index screen that shows only the clips with a " mark, only the clips with a # mark, or only clips with either shot mark. Operating modes: 157 Adding Shot Marks during Playback To add an " mark or # mark to a clip during playback or playback pause, you must first set an assignable button to [Add Shot Mark 1] or [Add Shot Mark 2] in advance. 1 Set an assignable button to [Add Shot Mark 1] or [Add Shot Mark 2] (A 129). 2 During playback or playback pause, press the assignable button at the point in the clip where you want to add the shot mark. • A message indicating the shot mark appears on the screen and the shot mark is added to the clip. • Adding a shot mark to a clip during playback will pause the playback. Adding Shot Marks from the Index Screen 1 Open the [Shot Mark] index screen or [Expand Clip] index screen. 2 Select the desired frame (thumbnail) and then press SET to open the clip menu. 3 Select [Add Shot Mark 1] or [Add Shot Mark 2] and then press SET. • The clip information screen appears and it prompts you to confirm the operation. 4 Select [OK] and then press SET. • The screen changes back to the previous index screen and the selected shot mark appears next to the selected clip's thumbnail. • Select [Cancel] instead to cancel the operation. NOTES • You can also add " marks (only) using the SHOT1 button on the supplied wireless controller. • Up to 100 shot marks (" and # marks combined) can be added to a single MXF clip. • There may be up to a 0.5 second delay from when you press the button to when the camcorder adds the shot mark. Deleting Shot Marks Operating modes: 1 Open the [Shot Mark] index screen or [Expand Clip] index screen. 2 Select the desired frame (thumbnail) and then press SET to open the clip menu. 3 Select [Del. Shot Mark 1] or [Del. Shot Mark 2] and then press SET. • The clip information screen appears and it prompts you to confirm the operation. 4 Select [OK] and then press SET. • The selected mark is deleted and the screen changes back to the previous index screen. • If a frame has no shot marks, it will no longer appear in the [Shot Mark] index screen. • Select [Cancel] instead to cancel the operation.