Canon XF205 XF200 XF205 Instruction Manual - Page 92
Time Code] submenu., TC/UB Setup]
View all Canon XF205 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Setting the Time Code NOTES • The frames value of the time code runs from 0 to 23 (frame rate set to 23.98P) or from 0 to 29 (all other frame rates). 92 • However, when [¤ TC/UB Setup] > [Time Code] > [XF Legacy Sync] is set to [On], even when the frame rate is set to 23.98P, the frames value of the time code output from the TIME CODE terminal will run from 0 to 29. • When you are using interval recording, frame recording or slow & fast motion recording mode, you cannot select the [Free Run] running mode. Conversely, when you are using pre-recording mode and when the movie format is set to MXF+MP4, [Free Run] is set automatically and cannot be changed. • When you mix drop frame and non-drop frame time codes, there might be a discontinuity in the time code at the point where the recording starts. • When you are using the [Free Run] running mode, the time code will continue running as long as the built-in rechargeable lithium battery is charged, even if you disconnect all other power sources. However, this is less accurate than when the camcorder is on. • If you set an assignable button to [Time Code] (A 129), you can press the button to open the [¤ TC/UB Setup] > [Time Code] submenu.