Dell 5230dn Mono Laser Printer Service Manual - Page 100
System, card assembly removal, on Sensor input late jam, service check. on,
View all Dell 5230dn Mono Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Error code or message 260.06 Error contents Sensor (envelope feeder pass through) late jam Source = Envelope feeder 260.07 260.10 260.11 260.12 260.13 Sensor (input) late jam Source = Envelope feeder Sensor (input) late jam Source = Envelope feeder Sensor (input) late jam Source = Envelope feeder Sensor (input) late jam Source = Envelope feeder sensor (envelope feeder pass through) static jam 260.14 Sensor (input) late jam Source = Envelope feeder Description/Action Possible repair actions The media is late reaching the sensor (envelope feeder pass through) within the specified time. The media is late reaching the sensor (input) within the specified time. The media is late reaching the sensor (input) within the specified time. The media is late reaching the sensor (input) within the specified time. The media is late reaching the sensor (input) within the specified time. Media remains on the sensor (envelope feeder pass through) during the warm up sequence. The media is late reaching the sensor (input) within the specified time. 1. Remove the envelope feeder. 2. Remove all media present in media path. 3. Ensure envelope feeder is not overfilled. 4. Check, clean or replace the envelope feeder pick roll for wear and excess contamination. 5. Check all connections on the envelope feeder. 6. Check all connections on the system card assembly. 7. Replace the envelope feeder assembly if problem remains. 8. Replace system card assembly if problem remains. Go to "System card assembly removal" on page 4-76. Go to sensor (input) late jam service check. See "Sensor (input) late jam service check." on page 2-123. Go to sensor (input) late jam service check. See "Sensor (input) late jam service check." on page 2-123. Go to sensor (input) late jam service check. See "Sensor (input) late jam service check." on page 2-123. Go to sensor (input) late jam service check. See "Sensor (input) late jam service check." on page 2-123. 1. Remove the envelope feeder. 2. Remove all media present in media path. 3. Replace the envelope feeder is problem remains. Go to sensor (input) late jam service check. See "Sensor (input) late jam service check." on page 2-123. 2-66 Service Manual