Dell 5230dn Mono Laser Printer Service Manual - Page 53
late jam service check.
View all Dell 5230dn Mono Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Error code or message 201.02 Error contents Sensor (fuser output) late jam. Type 1 fuser 201.03 Image data did not start in time Type 1 fuser 201.04 Sensor (narrow media) late jam Type 1 fuser 201.06 Sensor (narrow media) late jam Type 1 fuser 201.07 Sensor (fuser output) late jam Type 1 fuser 201.25 Sensor (fuser output) area jam. Type 2 fuser 201.26 Main drive motor assembly load error. Type 2 fuser Description/Action Possible repair actions The media is late reaching the sensor (fuser output) within the specified time. Printhead write failure The expected wide media is late reaching the sensor (narrow media) within the specified time. The expected wide media is late reaching the sensor (narrow media) within the specified time. The media is late reaching the sensor (fuser output) within the specified time. The media is jammed in the sensor (fuser output) area. The main drive motor assembly has failed or caused high mechanical load due to paper jam or bind. Go to sensor (fuser output) late jam service check. See "Sensor (fuser output) late jam service check." on page 2-129. If problem remains, a type 2 fuser can be installed. 1. Check all connections on the printhead assembly 2. Check all connections on the system card assembly. 3. Replace the printhead assembly if problem remains. 4. Replace the system card assembly if problem remains. Go to "System card assembly removal" on page 4-76. Go to sensor (narrow media) late jam service check. See "Sensor (narrow media) late jam service check." on page 2-133. Go to sensor (narrow media) late jam service check. See "Sensor (narrow media) late jam service check." on page 2-133. Go to sensor (fuser output) late jam service check. See "Sensor (fuser output) late jam service check." on page 2-129. Go to sensor (fuser output) service check. See "Sensor (fuser output) late jam service check." on page 2-129. 1. Check all connections on the main drive motor assembly. 2. Check all connections on the system card assembly. 3. Replace the main drive motor assembly if problem remains. Go to "Output cover assembly removal" on page 4-54. Diagnostic information 2-19