Dell 5230dn Mono Laser Printer Service Manual - Page 179
Sensor output pass through static jam service check
View all Dell 5230dn Mono Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 179 highlights
Step Check Yes No 3 Check the sensor (output pass through) for proper operation. Go to step 5. Go to step 4. 1. Enter the diagnostic mode 2. Select Output bin tests 3. Select Sensor test 4. Select Output bin x 5. Observe the line item "passthru" Does the display on the operator panel, change every time the sensing area of the above sensor is interrupted or blocked. 4 Check the above sensor for proper connection. Is the above sensor connected properly? Replace the sensor (output pass through). Replace the connection. Go to "High capacity stacker sensor (pass through) removal" on page 4-145. Go to "5-bin mailbox sensor (pass through) removal" on page 4-91. Go to "Output expander sensor (pass through) removal" on page 4-170. 5 Perform a print test using the output option. Does the error continue? Replace the output Problem solved. option. Sensor (output pass through) static jam service check Step Check Yes 1 Check the media path for partially fed or jammed media. Go to step 2. Is the media path free from partially fed or jammed media? 2 Check the sensor (output pass through) for proper operation. Go to step 4. 1. Enter the diagnostic mode 2. Select Output bin tests 3. Select Sensor test 4. Select Output bin x 5. Observe the line item "passthru" Does the display on the operator panel, change every time the sensing area of the above sensor is interrupted or blocked. No Remove any prestaged or jammed media. Go to step 3. Diagnostic information 2-145