Dell 5230dn Mono Laser Printer Service Manual - Page 157
Sensor pass through service check, Sensor envelope feeder empty service check, Sensor input late jam
View all Dell 5230dn Mono Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
Sensor (pass through) service check Step Check Yes No 1 1. Enter the diagnostic mode 2. Select Input tray tests The sensor is Go to step 2. working properly 3. Select Sensor test 4. Select the appropriate tray number 5. Observe the line item "pass through" for the appropriate media tray Does the display on the operator panel, change every time the sensing area of the above sensor is interrupted or blocked. 2 Check the above sensor for proper connection. Is the above sensor connected properly? Replace the sensor (pass through). Replace the connection. Go to "250-sheet controller card assembly removal" on page 4-107. Sensor (envelope feeder empty) service check Step Check Yes No 1 1. Enter the diagnostic mode 2. Select Input tray tests The sensor is Go to step 2. working properly 3. Select Sensor test 4. Select Envelope feeder 5. Observe the line item "empty" Does the display on the operator panel, change every time the sensing area of the above sensor is interrupted or blocked. 2 Check the above sensor for proper connection. Is the above sensor connected properly? Replace the Replace the envelope feeder. connection. Sensor (input) late jam service check. Use this procedure for the following jams: • 200.07 • 230.04 • 230.06 • 241.06 • 214.10 • 241.11 • 241.15 • 241.16 • 241.18 • 250.06 • 250.07 • 250.08 • 250.11 • 260.07 • 260.10 • 260.14 • 260.15 • 260.16 • 237.00 • 241.12 • 242.09 • 250.09 • 260.11 • 239.11 • 241.14 • 250.03 • 250.10 • 260.12 Diagnostic information 2-123