Dell 5230dn Mono Laser Printer Service Manual - Page 108
detect that the eject
View all Dell 5230dn Mono Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Error code or message 28x.42 x = bin number 28x.43 x = bin number 28x.44 x = bin number 28x.45 x = bin number Error contents Right tamper does not leave home position failure Applies to: StapleSmart finisher Right tamper does not move to home position failure. Applies to: StapleSmart finisher Eject home position jam Applies to: StapleSmart finisher Eject home position jam Applies to: StapleSmart finisher Description/Action Possible repair actions The sensor (right tamper HP) does not detect that the tamper has moved from home position. The sensor (right tamper HP) does not detect that the tamper has reached home position. The sensor (eject HP) does not detect that the eject mechanism is operating. The sensor (eject HP) does not detect the home position upon completion of normal media eject operation. 1. Check all the connections on the output option controller card. 2. Check the tamper drive belt for damage and replace if needed. 3. Replace the right tamper motor assembly. Go to "SFP stapler assembly tamper drive motor assembly removal" on page 4-181. 4. Replace the sensor (tamper HP). Go to "SFP stapler assembly sensor (tamper HP left and right) removal" on page 4-188. 4. Replace the output option if problem remains. 1. Check all the connections on the output option controller card. 2. Check the tamper drive belt for damage and replace if needed. 3. Replace the right tamper motor assembly. Go to "SFP stapler assembly tamper drive motor assembly removal" on page 4-181. 4. Replace the sensor (tamper HP). Go to "SFP stapler assembly sensor (tamper HP left and right) removal" on page 4-188. 4. Replace the output option if problem remains. 1. Check all the connections on the output option controller card. 2. Replace the output option if problem remains. 1. Check all the connections on the output option controller card. 2. Replace the output option if problem remains. 2-74 Service Manual