Dell 5230dn Mono Laser Printer Service Manual - Page 45
Too Many Trays
View all Dell 5230dn Mono Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Error code or message 58 Error contents Too Many Disks Installed 58 Too Many Flash Options 58 Too Many Trays Attached 59 Incompatible Duplex 59 Incompatible Envelope Feeder Description/Action This error code displays when too many disks are attached to the printer. This error code displays when too many user flash memory options or too many optional firmware cards have been installed. User can power off and remove extra flash options. This error code displays when too many input trays are attached to the printer. Note: With the RFID option attached, the maximum number of trays is three. Without the RFID option attached, the maximum number is four. An incompatible duplex option is installed. Remove the incompatible duplex option and press to clear the message. Note: If the user installed the incompatible device to satisfy a Check Device Connections/ reattach message, the user should reinstall an associated compatible option or hot unplug the option. An incompatible envelope feeder is installed. Remove the incompatible feeder and press the message. to clear Note: If the user installed the incompatible device to satisfy a Check Device Connections/ reattach message, the user should reinstall an associated compatible option or hot unplug the option. Possible repair actions 1. Turn off and unplug the printer. 2. Remove the excess disks. 3. Plug in the printer, and turn it on. 1. Turn off and unplug the printer. 2. Remove the excess flash memory. 3. Plug in the printer, and turn it on. 1. Turn off and unplug the printer. 2. Remove the excess trays. 3. Plug in the printer, and turn it on. 1. Turn off and unplug the printer. 2. Remove the incompatible external duplex unit assembly. 3. Plug in the printer, and turn it on. 1. Turn off and unplug the printer. 2. Remove the incompatible envelope feeder. 3. Plug in the printer, and turn it on. Diagnostic information 2-11