Dell 5230dn Mono Laser Printer Service Manual - Page 147
System card, assembly removal on,
View all Dell 5230dn Mono Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
Error code or message 982.04 Error contents Output option communication failure. 982.06 Paperport failure 982.07 982.11 Too many options installed Paperport failure 982.12 Paperport failure 982.13 Hot plug failure 983.00 Communication failure 984.00 Communication failure Description/Action Possible repair actions An output option was not fully seated onto the printer or has been removed while the main power is turned on. Paper port priortizer error. Option device message was not read by the priortizer. Exceeded the maximum number of input or output options. Command response error on the paper port. Response is too large for the communications buffer. Bad bottom trunk on the paper port. The printer has detected a hot plug of an optional device. Low-level error on paper port. Invalid command received by the paper port device. Invalid command parameter received by the paper port device. 1. Turn the main power off. 2. Remove and reinstall the output option. 3. Turn the main power back on. 4. Check all output option interface connections if problem remains. Replace the system card assembly. Go to "System card assembly removal" on page 4-76. Remove the appropriate input or output options. Replace the system card assembly. Go to "System card assembly removal" on page 4-76. Replace the system card assembly. Go to "System card assembly removal" on page 4-76. Power the machine off/on after all options are installed. Replace the system card assembly. Go to "System card assembly removal" on page 4-76. Replace the system card assembly. Go to "System card assembly removal" on page 4-76. Diagnostic information 2-113