Dell 5230dn Mono Laser Printer Service Manual - Page 109
SFP stapler assembly, sensor paddle HP removal, on sensor deflector HP, removal
View all Dell 5230dn Mono Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Error code or message 28x.46 x = bin number 28x.47 x = bin number 28x.48 x = bin number 28x.49 x = bin number Error contents Paddle home position jam Applies to: StapleSmart finisher Paddle home position jam Applies to: StapleSmart finisher Deflector gate transition to output option not detected Applies to: StapleSmart finisher Deflector gate transition to standard bin not detected Applies to: StapleSmart finisher Description/Action The sensor (paddle HP) does not detect that the paddle is operating. The sensor (paddle HP) does not detect the home position upon completion of normal paddle operation. The sensor (deflector gate HP) does not detect transition of the deflector gate to the output option. The sensor (deflector gate HP) does not detect transition of the deflector gate to the standard bin. Possible repair actions 1. Check all the connections on the output option controller card. 2. Check the sensor (paddle HP) for damage and replace if needed. Go to "SFP stapler assembly sensor (paddle HP) removal" on page 4-186. 3. Replace the output option if problem remains. 1. Check all the connections on the output option controller card. 2. Check the sensor (paddle HP) for damage and replace if needed. Go to "SFP stapler assembly sensor (paddle HP) removal" on page 4-186. 3. Replace the output option if problem remains. 1. Check all the connections on the output option controller card. 2. Check the sensor (deflector HP) for damage and replace if needed. Go to "SFP stapler assembly sensor (deflector HP) removal" on page 4-191. 3. Replace the output option if problem remains. 1. Check all the connections on the output option controller card. 2. Check the sensor (deflector HP) for damage and replace if needed. Go to "SFP stapler assembly sensor (deflector HP) removal" on page 4-191. 3. Replace the output option if problem remains. Diagnostic information 2-75