Dell 5230dn Mono Laser Printer Service Manual - Page 231

Configuration menu (CONFIG MENU) (models 5230n/dn, 5350dn, and 5530dn) Entering Configuration Menu (models 5230n/dn, 5350dn, and 5530dn) 1. Turn off the printer. 2. Press and hold and . 3. Turn on the printer. 4. Release the buttons after ten seconds. The message CONFIG MENU displays on the top line of the operator panel. Available menus Maint Cnt Value Reset Cnt Prt Quality Pgs Reports SIZE SENSING Panel Menus PPDS Emulation Demo Mode Factory Defaults LES Applications Energy Conserve Paper Prompts Env Prompts Action for Prompts Font Sharpening Wiper Messages Clear Custom Status Best Speed Exit Config Menu See "Maintenance page count (Maint Cnt Value)" on page 3-25 See "Maintenance page counter reset (Reset Cnt)" on page 3-26 See "Print quality pages (Prt Quality Pgs)" on page 3-26 See "Reports" on page 3-26. See "SIZE SENSING" on page 3-27 See "Panel Menus" on page 3-27 See "PPDS Emulation" on page 3-27 See "Demo Mode" on page 3-27 See "Factory Defaults" on page 3-28 See "LES Applications" on page 3-28 See "Energy Conserve" on page 3-28 See "Paper Prompts" on page 3-28 See "Env Prompts" on page 3-28 See "Action for Prompts" on page 3-28 See "Font Sharpening" on page 3-28 See "Wiper Messages" on page 3-28 See "Clear Custom Status" on page 3-28 See "Best Speed" on page 3-29 See "Exit Config Menu" on page 3-29 Some menus are not available, depending on the configuration of the printer. Maintenance page count (Maint Cnt Value) The current value for the maintenance page counter is displayed. This counter tracks printer usage. A print job containing a single page increments the counter by one and a duplex page by two. At 300,000, the customer is reminded that the printer requires scheduled maintenance. This counter is reset by the servicer after an 80 Scheduled Maintenance message displays, and a maintenance kit is installed. See "Maintenance kit" on page 6-2 for the part number. Diagnostic aids 3-25