Dell 5230dn Mono Laser Printer Service Manual - Page 107
SFP stapler assembly, tamper drive motor, assembly removal on, sensor tamper HP left
View all Dell 5230dn Mono Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Error code or message 28x.40 x = bin number Error contents Left tamper does not leave home position failure Applies to: StapleSmart finisher 28x.41 x = bin number Left tamper does not move to home position failure. Applies to: StapleSmart finisher Description/Action Possible repair actions The sensor (left tamper HP) does not detect that the tamper has moved from home position. The sensor (left tamper HP) does not detect that the tamper has reached home position. 1. Check all the connections on the output option controller card. 2. Check the tamper drive belt for damage and replace if needed. 3. Replace the left tamper motor assembly. Go to "SFP stapler assembly tamper drive motor assembly removal" on page 4-181. 4. Replace the sensor (tamper HP). Go to "SFP stapler assembly sensor (tamper HP left and right) removal" on page 4-188. 4. Replace the output option if problem remains. 1. Check all the connections on the output option controller card. 2. Check the tamper drive belt for damage and replace if needed. 3. Replace the left tamper motor assembly. Go to "SFP stapler assembly tamper drive motor assembly removal" on page 4-181. 4. Replace the sensor (tamper HP). Go to "SFP stapler assembly sensor (tamper HP left and right) removal" on page 4-188. 4. Replace the output option if problem remains. Diagnostic information 2-73