Dell 5230dn Mono Laser Printer Service Manual - Page 64
service check
View all Dell 5230dn Mono Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Error code or message 202.87 202.88 202.99 203.00 203.01 Error contents Sensor (fuser output) lingering jam. Destination is output option. Type 2 fuser Fuser page count has exceeded life. Sensor (fuser output) static jam and Sensor (narrow media) static jam Type 2 fuser Fuser page count has exceeded life. Fuser ID chip failure Paper jam around redrive area. Internal duplex drive motor control failure. Internal duplex Description/Action Media reached the sensor (fuser output) but did not clear it in the specified time. and Media did reach the sensor (narrow media) Media remains on the sensor (fuser output) and the sensor (narrow media) during the warm up sequence. The system does not recognize the ID chip on the fuser unit. Page may be jammed in redrive area. The internal duplex drive motor motor does not reach the proper operating speed at the specified time. Possible repair actions Go to sensor (fuser output) lingering jam service check. See "Sensor (fuser output) lingering jam service check." on page 2-131. 1. Go to sensor (fuser output) static jam service check. See "Sensor (fuser output) static jam service check" on page 2-132. 2. Go to sensor (narrow media) static jam service check. See "Sensor (narrow media) static jam service check" on page 2-134. Replace the fuser unit assembly. Go to "Fuser unit assembly removal" on page 4-22, 1. Remove all media present in media path. 2. Check media for proper installation. 3. Check for obstructions in media path. 4. Go to sensor (fuser output) service check. See "Sensor (fuser output) service check" on page 2-120. 5. Go to sensor (narrow media) service check. See "Sensor (narrow media) service check" on page 2-121. 1. Remove all media present in media path. 2. Check all connections on the duplex media entrance drive motor assembly. 3. Check all connections on the system card assembly. 4. Replace the duplex media entrance drive motor assembly if problem remains. Go to "Duplex drive motor assembly removal (5350dn, 5530dn, and T656)" on page 4-18. 2-30 Service Manual