Dell 5230dn Mono Laser Printer Service Manual - Page 41

Error code or message 44.26 Error contents RFID Error 44.27 44.28 44.29 44.31 44.32 44.33 RFID Error RFID Error RFID Error RFID Error RFID Error RFID Error 44.34 RFID Error 44.35 RFID Error Description/Action Possible repair actions Based on tag location parameters: tag is not compatible with printer Unsupported SA Code Invalid Power setting Unsupported Feature Generic run-time reader error Reader response timeout Garbled or short response from reader 1. These error codes most likely indicate a problem with the customer's datastream, and not the RFID Option itself. Ensure there is nothing wrong with the customer's datastream. 2. Check the RFID firmware card, RFID interface card, RFID cable, and RFID option for correct installation. Go to "High capacity input tray (HCIT) pick arm bracket assembly removal" on page 4-131. 3. Replace the RFID UHF option. Read/Verify operation failed (tag data from reader != expected value) Invalid RFID region 1. Retest using new RFID media 2. Check the RFID firmware card, RFID interface card, RFID cable, and RFID option for correct installation. Go to "High capacity input tray (HCIT) pick arm bracket assembly removal" on page 4-131. 3. Replace the RFID UHF option. 1. Check the RFID firmware card, RFID interface card, RFID cable, and RFID option for correct installation. Go to "High capacity input tray (HCIT) pick arm bracket assembly removal" on page 4-131. 2. Replace the RFID UHF option. Diagnostic information 2-7