Dell 5230dn Mono Laser Printer Service Manual - Page 199

Background (fog) Leading edge Trailing edge Step Check 1 Check the media condition. Load new, dry, recommended media. Re-print the defective image. Does the error continue? 2 Check the media transfer route. Is the media path free of contamination or debris. 3 Check the print cartridge for proper installation. Is the above component properly installed? Yes Go to step 2. Go to step 3. Go to step 4. 4 Check the transfer roll assembly for contamination and Go to step 5. wear. Is the above component free of excess wear and contamination? 5 Check the HVPS card assembly for proper connection. Go to step 6. Is the above component connected properly? 6 Check the printhead installation. Is the above component properly installed? Go to step 7. No Problem solved. Remove debris or contamination. Inspect, clean and reinstall replace the print cartridge. Replace the transfer roll assembly. Go to "Transfer roll assembly removal" on page 4-80. Replace the connections. Reinstall and adjust the printhead assembly. Go to "Printhead assembly removal (5230n/dn)" on page 4-60 or "Printhead assembly removal (5350dn, 5530dn, and T656)" on page 4-61. Diagnostic information 2-165