Dell 5230dn Mono Laser Printer Service Manual - Page 178

Step Check Yes No 2 Check for obstructions in the media path between the base Go to step 3. machine and the output option. Remove obstructions. Is the media path free from obstructions? 3 Check the sensor (output pass through) for proper operation. Go to step 5. Go to step 4. 1. Enter the diagnostic mode 2. Select Output bin tests 3. Select Sensor test 4. Select Output bin x 5. Observe the line item "passthru" Does the display on the operator panel, change every time the sensing area of the above sensor is interrupted or blocked. 4 Check the above sensor for proper connection. Is the above sensor connected properly? Replace the sensor (output pass through). Replace the connection. Go to "High capacity stacker sensor (pass through) removal" on page 4-145. Go to "5-bin mailbox sensor (pass through) removal" on page 4-91. Go to "Output expander sensor (pass through) removal" on page 4-170. 5 Perform a print test using the output option. Does the error continue? Replace the output Problem solved. option. Sensor (output pass through) lingering jam service check Step Check Yes 1 Check the output option for proper installation. Is the above component properly installed? Go to step 2. 2 Check for obstructions in the media path between the Go to step 3. Sensor (output pass through) machine and the media bin. Is the media path free from obstructions? No Remove then reinstall the output option Remove obstructions. 2-144 Service Manual