Dell 5230dn Mono Laser Printer Service Manual - Page 378
Printhead assembly removal 5230n/dn
View all Dell 5230dn Mono Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 378 highlights
Printhead assembly removal (5230n/dn) Note: When replacing the printhead assembly, ensure that the printhead is properly calibrated, or print quality issues will occur. Go to "Alignment assembly adjustment" on page 4-4. 1. Remove the laser cover. Go to "Laser cover removal" on page 4-26. 2. Remove the six screws (A) securing the metal cover to the machine. A A 3. Remove the metal cover. 4. Disconnect the connections (B) from the printhead assembly. B 4-60 Service Manual
4-60
Service Manual
Note:
When replacing the printhead assembly, ensure that the printhead is properly calibrated, or print quality
issues will occur. Go to
“Alignment assembly adjustment” on page 4-4
.
1.
Remove the laser cover. Go to
“Laser cover removal” on page 4-26
.
2.
Remove the six screws (A) securing the metal cover to the machine.
3.
Remove the metal cover.
4.
Disconnect the connections (B) from the printhead assembly.
A
A
B
Printhead assembly removal (5230n/dn)