Dell 5230dn Mono Laser Printer Service Manual - Page 395
There are two fine thread screws and four course thread screws securing the system card assembly
View all Dell 5230dn Mono Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 395 highlights
4. Remove the metal shield. WARNING: When disconnecting all the electrical connections, ensure that the connectors and harnesses do not become damaged. 5. Disconnect all connections from the system card assembly. Note: There are two fine thread screws and four course thread screws securing the system card assembly to the machine, ensure that these screws are properly reinstalled. 6. Remove the six screws (B) securing the system card assembly to the machine. Repair Information 4-77
Repair Information
4-77
4.
Remove the metal shield.
WARNING:
When disconnecting all the electrical connections, ensure that the connectors and harnesses do
not become damaged.
5.
Disconnect all connections from the system card assembly.
Note:
There are two fine thread screws and four course thread screws securing the system card assembly to
the machine, ensure that these screws are properly reinstalled.
6.
Remove the six screws (B) securing the system card assembly to the machine.