Dell 5230dn Mono Laser Printer Service Manual - Page 54

Error code or message 201.27 201.28 201.29 201.30 201.31 201.32 201.50 Error contents Sensor (fuser output) late jam. Type 2 fuser Image data did not start in time Type 2 fuser Sensor (narrow media) late jam Type 2 fuser Operator panel door assembly interlock switch failure Type 2 fuser Sensor (narrow media) late jam Type 2 fuser Sensor (fuser output) late jam Type 2 fuser Sensor (fuser output) late jam Type 1 fuser Fuser page count has exceeded life. Description/Action The media is late reaching the sensor (fuser output) within the specified time. Printhead write failure The expected wide media is late reaching the sensor (narrow media) within the specified time. The printer detected that the operator panel door interlock switch did not cycle prior to printer restart. The expected wide media is late reaching the sensor (narrow media) within the specified time. The media is late reaching the sensor (fuser output) within the specified time. The media is late reaching the sensor (fuser output) within the specified time. Possible repair actions Go to sensor (fuser output) late jam service check. See "Sensor (fuser output) late jam service check." on page 2-129. If problem remains, a type 2 fuser can be installed. 1. Check all connections on the printhead assembly 2. Check all connections on the system card assembly. 3. Replace the printhead assembly if problem remains. 4. Replace the system card assembly if problem remains. Go to "System card assembly removal" on page 4-76. Go to sensor (narrow media) late jam service check. See "Sensor (narrow media) late jam service check." on page 2-133. 1. Remove all media present in media path. 2. Ensure that the operator panel door assembly is fully open then fully closed. 3. Check operator panel door assembly for damage. 4. Check interlock switch (in left operator panel hinge) for damage. 5. Check all connections on the system card assembly. Go to sensor (narrow media) late jam service check. See "Sensor (narrow media) late jam service check." on page 2-133. Go to sensor (fuser output) late jam service check. See "Sensor (fuser output) late jam service check." on page 2-129. Go to sensor (fuser output) service check. See "Sensor (fuser output) service check" on page 2-120. 2-20 Service Manual