Dell 5230dn Mono Laser Printer Service Manual - Page 59
output service check
View all Dell 5230dn Mono Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Error code or message 202.25 Error contents Paper jam around fuser exit or redrive area. Type 2 fuser 202.26 202.27 Sensor (fuser output) lingering jam. Destination is standard bin. Type 2 fuser Sensor (fuser output) lingering jam. Type 2 fuser 202.28 Sensor (narrow media) static jam Type 2 fuser 202.29 Sensor (fuser output) bounce Type 2 fuser 202.30 202.31 Never sent the divert command to the stacker. Type 2 fuser Sensor (fuser output) static jam Type 2 fuser 202.32 Sensor (fuser output) lingering jam. Type 2 fuser Description/Action Possible repair actions Page may be jammed in fuser exit or redrive area. Media reached the sensor (fuser output) but did not clear it in the specified time. and Media did not reach the sensor (narrow media) Media reached the sensor (fuser output) but did not clear it in the specified time. Media remains on the sensor (narrow media) during the warm up sequence. The sensor (fuser output) rebounded once the trailing edge of the media passed. 1. Remove all media present in media path. 2. Check media for proper installation. 3. Check for obstructions in media path. 4. Go to sensor (fuser output) service check. 5. See "Sensor (fuser output) service check" on page 2-120. 6. Go to sensor (narrow media) service check. See "Sensor (narrow media) service check" on page 2-121. Go to sensor (fuser output) lingering jam service check. See "Sensor (fuser output) lingering jam service check." on page 2-131. Go to sensor (fuser output) lingering jam service check. See "Sensor (fuser output) lingering jam service check." on page 2-131. Go to sensor (narrow media) static jam service check. See "Sensor (narrow media) static jam service check" on page 2-134. Go to sensor (fuser output) service check. See "Sensor (fuser output) service check" on page 2-120. Media remains on the sensor (fuser output) during the warm up sequence. Media reached the sensor (fuser output) but did not clear it in the specified time. Go to sensor (fuser output) static jam service check. See "Sensor (fuser output) static jam service check" on page 2-132. Go to sensor (fuser output) lingering jam service check. See "Sensor (fuser output) lingering jam service check." on page 2-131. Diagnostic information 2-25