Dell 5230dn Mono Laser Printer Service Manual - Page 85
The HCIT tray lift motor does
View all Dell 5230dn Mono Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Error code or message 243.49 Error contents HCIT tray lift motor stalled failure Source = Tray 3 243.50 HCIT tray lift motor underspeed failure Source = Tray 3 243.52 HCIT tray lift motor overrun failure Source = Tray 3 Description/Action Possible repair actions The HCIT tray lift motor has stalled or has become obstructed. The HCIT tray lift motor does not rotate at the specified speed. The HCIT tray lift motor continues to detect pulses after the motor has turned off. 1. Ensure the HCIT media tray assembly is properly inserted into the machine. 2. Check the HCIT tray lift motor assembly for binding or damage. 3. Replace the HCIT tray lift drive motor assembly if problem remains. Go to "High capacity input tray (HCIT) tray lift drive motor assembly removal" on page 4-126. 1. Ensure the HCIT media tray assembly is properly inserted into the machine. 2. Check the HCIT tray lift motor assembly for binding or damage. 3. Replace the HCIT tray lift drive motor assembly if problem remains. Go to "High capacity input tray (HCIT) tray lift drive motor assembly removal" on page 4-126. 1. Ensure the HCIT media tray assembly is properly inserted into the machine. 2. Check the HCIT tray lift motor assembly for binding or damage. 3. Replace the HCIT tray lift drive motor assembly if problem remains. Go to "High capacity input tray (HCIT) tray lift drive motor assembly removal" on page 4-126. Diagnostic information 2-51