Dell 5230dn Mono Laser Printer Service Manual - Page 99

Error code or message 260.01 Error contents Envelope feeder assembly error 260.02 Envelope feeder assembly error 260.05 Sensor (envelope feeder pass through) lingering jam Source = Envelope feeder Description/Action Mechanical feed error or timing error. Mechanical feed error or timing error. The media reached the sensor (envelope feeder pass through) but did not clear it in the specified time. Possible repair actions 1. Remove the envelope feeder. 2. Remove all media present in media path. 3. Check media for proper installation. 4. Check for obstructions in media path. 5. Ensure the envelope feeder assembly is properly installed. 6. Check all connections on the envelope feeder assembly. 7. Replace the envelope feeder assembly if problem remains. 1. Remove the envelope feeder. 2. Remove all media present in media path. 3. Check media for proper installation. 4. Check for obstructions in media path. 5. Ensure the envelope feeder assembly is properly installed. 6. Check all connections on the envelope feeder assembly. 7. Replace the envelope feeder assembly if problem remains. 1. Remove the envelope feeder. 2. Remove all media present in media path. 3. Check for obstructions in media path. 4. Ensure the envelope feeder assembly is properly installed. 5. Check all connections on the envelope feeder assembly. 6. Replace the envelope feeder assembly if problem remains. Diagnostic information 2-65