Dell 5230dn Mono Laser Printer Service Manual - Page 102
SFP stapler assembly
View all Dell 5230dn Mono Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Error code or message 27x.15 x = bin number Error contents Sensor (output pass through) static jam Applies to: High capacity stacker Mailbox Offset stacker Output expander Description/Action Media remains on the sensor (output pass through) during the warm up sequence. Media remains on the sensor (mailbox empty) during the warm up sequence. Possible repair actions See "Sensor (output pass through) static jam service check" on page 2-145. See "Sensor (mailbox empty) static jam service check" on page 2-147. 27x.29 x = bin number 27x.50 x = bin number 27x.50 x = bin number 27x.51 x = bin number Sensor (mailbox empty) static jam Applies to: Mailbox Sensor (output pass through) lingering jam Applies to: Offset stacker Mailbox Output expander High capacity stacker Sensor (output pass through) lingering jam Applies to: Mailbox The media reached the sensor (output pass through) but did not clear it in the specified time. See "Sensor (output pass through) lingering jam service check" on page 2-144. The media reached the sensor (output pass through) but did not clear it in the specified time. See "Sensor (output pass through) lingering jam service check" on page 2-144. Left tamper does not leave home position failure Applies to: Offset stacker Sensor (output pass through) late jam Applies to: Mailbox The sensor (left tamper HP) does not detect that the tamper has moved from home position. The media is late reaching the sensor (output pass through) within the specified time. 1. Check all the connections on the output option controller card. 2. Check the tamper drive belt for damage and replace if needed. 3. Replace the left tamper motor assembly. Go to "SFP stapler assembly tamper drive motor assembly removal" on page 4-181. 4. Replace the sensor (tamper HP). Go to "SFP stapler assembly sensor (tamper HP left and right) removal" on page 4-188. 4. Replace the output option if problem remains. See "Sensor (output pass through) late jam service check" on page 2-143. 2-68 Service Manual