Dell 5230dn Mono Laser Printer Service Manual - Page 399
Transfer roll bracket assembly, left removal
View all Dell 5230dn Mono Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 399 highlights
3. Gently unsnap the transfer roll assembly from the machine. 4. Remove the transfer roll assembly. Replacement Warning: When replacing the transfer roll assembly, do not touch the foam surface. Transfer roll bracket assembly, left removal 1. Remove the transfer roll assembly. Go to "Transfer roll assembly removal" on page 4-80. 2. Remove the inner deflector. Go to "Inner deflector removal" on page 4-24. 3. Remove the screw (A) securing the transfer roll bracket assembly, left to the machine. 4. Remove the transfer roll bracket assembly, left. 5. Remove the roll clamp (B) from the transfer roll bracket assembly, left. 6. Remove the bushing (C). 7. Remove the spring (D). 8. Remove the screw (E). Repair Information 4-81
Repair Information
4-81
3.
Gently unsnap the transfer roll assembly from the machine.
4.
Remove the transfer roll assembly.
Replacement Warning:
When replacing the transfer roll assembly, do not touch the foam surface.
Transfer roll bracket assembly, left removal
1.
Remove the transfer roll assembly. Go to
“Transfer roll assembly removal” on page 4-80
.
2.
Remove the inner deflector. Go to
“Inner deflector removal” on page 4-24
.
3.
Remove the screw (A) securing the transfer roll bracket assembly, left to the machine.
4.
Remove the transfer roll bracket assembly, left.
5.
Remove the roll clamp (B) from the transfer roll bracket assembly, left.
6.
Remove the bushing (C).
7.
Remove the spring (D).
8.
Remove the screw (E).