Dell 5230dn Mono Laser Printer Service Manual - Page 101

Error code or message 260.15 260.16 271.03 x = bin number 271.04 x = bin number 271.05 x = bin number 27x.14 x = bin number Error contents Sensor (input) late jam Source = Envelope feeder Sensor (input) late jam Source = Envelope feeder Sensor (output pass through) lingering jam Applies to: High capacity output Output expander Sensor (output pass through) late jam Applies to: High capacity output Output expander Sensor (output pass through) lingering jam Applies to: High capacity output Output expander Sensor (output pass through) static jam Applies to: High capacity stacker Mailbox Offset stacker Output expander Description/Action Possible repair actions The media is late reaching the sensor (input) within the specified time. The media is late reaching the sensor (input) within the specified time. The media reached the sensor (output pass through) but did not clear it in the specified time. Go to sensor (input) late jam service check. See "Sensor (input) late jam service check." on page 2-123. Go to sensor (input) late jam service check. See "Sensor (input) late jam service check." on page 2-123. See "Sensor (output pass through) lingering jam service check" on page 2-144. The media is late reaching the sensor (output pass through) within the specified time. See "Sensor (output pass through) late jam service check" on page 2-143. The media reached the sensor (output pass through) but did not clear it in the specified time. See "Sensor (output pass through) lingering jam service check" on page 2-144. Media remains on the sensor (output pass through) during the warm up sequence. Media remains on the sensor (mailbox empty) during the warm up sequence. See "Sensor (output pass through) static jam service check" on page 2-145. See "Sensor (mailbox empty) static jam service check" on page 2-147. Sensor (mailbox empty) static jam Applies to: Mailbox Diagnostic information 2-67