Epson 1520 User Manual - Page 101
ESC/P 2, PC437, Italic U.S.A, AGM IBM XL24E mode only
UPC - 010343813328
View all Epson 1520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Using Your Printer with DOS Setting Software (emulation mode) Auto CR (IBM XL24E mode only) AGM (IBM XL24E mode only) Character table International character set for Italic table Auto line feed Network I/F (interface) mode 0 slash Page length Skip over perforation Options Description ESC/P 2, IBM XL24E Specifies the control mode you want the printer to use. For the best font and graphics control, always use ESC/P 2 mode. If you need to emulate an IBM® Proprinter,™ select IBM XL24E mode. For a list of the commands for these modes, see page 5-17. Off, On In IBM XL24E mode, lets you select whether the printer performs a carriage-return line-feed operation when it reaches the right margin (On) or only when it receives a carriage-return code in the print job (Off). Off, On In IBM XL24E mode, turns high resolution, 24-pin graphics command mode on or off. - See the samples beginning on page 5-8. The default character table is PC437. - See the samples beginning on page 5-8. The default character set is Italic U.S.A. Off, On Sets the printer to perform a line-feed operation every time it receives a carriage-return command (On), or not to perform one (Off). Off, On Sets whether the printer is (On) or is not (Off) shared by more than one computer. 0, 0/ Selects either a slashed zero (0/ ) or a regular zero (0) to be printed when a zero command is received. 11, 12, 8.5, or 70/6 When printing on continuous paper, select inches the length of the individual sheets. 70/6 is the length of A4-size paper. Off, On If your software doesn't let you set top and bottom margins, turn this setting On to add a one-inch margin over the perforation to separate text on continuous pages. 5-6