Epson 1520 User Manual - Page 66
Adjusting the Tear-off Position, Switching Between Continuous and Single-sheet Paper
UPC - 010343813328
View all Epson 1520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Printing on Special Media Caution: Never adjust the tear-off position when you're printing labels. This could feed labels backward, causing them to tear off inside the printer. Adjusting the Tear-off Position First make sure that continuous paper is loaded in the current tear-off position (see page 3-18 for details). Follow these steps to adjust the tear-off position: 1. Press the Micro Adjust U button to feed paper backward or the Micro Adjust D button to feed paper forward. Press either button as many times as necessary to align the perforation with the tear-off edge. When the adjustment reaches the maximum setting for your printer, it does not move further. 2. Tear off any printed pages. 3. Press the Load/Eject button to feed the rest of the continuous paper backward to the paper-park position so it's ready for printing the next time you need it. The tear-off position you select remains in effect until you change it again, even when you turn off the printer. For instructions on setting your printer's auto tear-off mode, see page 5-3. Switching Between Continuous and Single-sheet Paper When you have both continuous paper and single sheet paper loaded in the built-in sheet feeder, you can switch between paper types whenever you need to print on them. Follow these steps: 1. If continuous paper remains inside the printer, tear off the printed pages. Then press the Load/Eject button on the printer's control panel to feed the paper backward to the paper-park position. If single sheet paper is loaded, press the Load/Eject button to eject any sheets still inside the printer. 3-21