Epson 1520 User Manual - Page 70
below, with the printable side, Position the roll paper so it feeds into the printer as shown
UPC - 010343813328
View all Epson 1520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Printing on Special Media 7. Clip the banner paper cutting guide onto the output tray posts. Caution: Adjust the banner paper holders so they fit the roll paper snugly, but not so tightly that the roll can't rotate. If they're too tight, the paper won't feed into the printer. 8. Slide the left banner paper holder all the way to the left and slide the right banner paper holder approximately 1/8-inch (3 mm) from the far right edge. 9. Position the roll paper so it feeds into the printer as shown below, with the printable side face up. Then place it onto the right banner paper holder and slide the left holder over to support the roll. Align the roll paper's edges with the edge guides on the holders. set to about 1/8-inch (3 mm) from the far right position 3-25