Home » Epson Manuals » Inkjet Printers » Epson 1520 » Manual Viewer

Epson 1520 User Manual - Page 134

The printer software installed with Windows 3.1 does not work correctly after

UPC - 010343813328

Add to My Manuals
Save this manual to your list of manuals

Page 134 highlights

Troubleshooting All the lights are flashing. Possible cause An internal error may have occurred. Solution Turn off your printer, wait five seconds, and turn it on again. If the lights still flash or stay on, contact EPSON as described in the Introduction. The printer has finished charging an ink cartridge, but the Pause light is still flashing. Possible cause Solution The ink cartridge clamp isn't Press down on the clamp to lock it into place. locked down. The printer needs to initialize. If the printer is not moving or making noise, but the light is still flashing after 10 minutes, turn the printer off. If the light is still flashing when you turn it back on, contact EPSON as described in the Introduction. The printer sounds like it's printing but nothing prints. Possible cause Solution The print head nozzles are Clean the print heads. See Chapter 6 for instructions. clogged. The ink cartridges are too old. For information on cartridge life and replacement instructions, see Chapter 6. The printer is charging ink. If you just turned on the printer, it may be charging the ink delivery system, especially if it has been turned off for a while. This can take up to 7 minutes; wait until it finishes before printing. The printer software installed with Windows 3.1 does not work correctly after you upgrade to Windows 95. Possible cause Solution Your printer software isn't Reinstall the printer software after installing Windows 95, as set up for Windows 95. described in the Quick Setup booklet. After you install your printing software, you see the Windows 95 New Hardware Found window. Possible cause Solution An operating system error Click Do not install a driver, and then click OK. has occurred. 7-10

Section	Page
FRONT MATTER	1
PRINTER DIAGRAM	4
CONTENTS	5
INTRODUCTION	10
PC System Requirements	11
Macintosh System Requirements	11
How To Use Your Manuals	12
Warnings, Cautions, Notes, and Tips	13
Where To Get Help	14
Electronic Support Services	14
ENERGY STAR Compliance	16
Energy-saving Tips	16
Important Safety Instructions	16
CHAP 1-BASIC PRINTING	19
Printing from Windows	19
Setting Printer Options from Windows Applications	20
Setting Default Printer Options	23
Checking Printer Status	25
Printing from a Macintosh	27
Using Online Help	29
Accessing Help from Windows Applications	29
Accessing Help from Windows 95	30
Accessing Help from Windows 3.1	30
Accessing Help from WindowsNT4.0	30
Accessing Help from WindowsNT3.51	30
Accessing Help from Macintosh Applications	30
What To Do When the Printer Lights Come On	31
CHAP 2-CUSTOM PRINTING	33
Using Predefined Advanced Settings	33
Customizing Print Quality and Special Effects	36
Customizing Color Settings	39
Using ColorSync on the Macintosh	42
Saving Custom Settings	43
Deleting Custom Settings	44
Redefining Custom Settings	45
CHAP 3-PRINTING ON SPECIAL MEDIA	46
Using Special Media Types	47
Media Loading and Software Setting Guidelines	48
Additional Media Loading Guidelines	50
Printing on Single Sheets	51
Loading Paper in the Built-in Sheet Feeder	51
Loading Paper in the Manual Feeder	56
Printing on Continuous Paper	59
Removing Continuous Paper	63
Using the Micro Adjust Buttons	65
Adjusting the Loading Position	65
Adjusting the Tear-off Position	66
Switching Between Continuous and Single-sheet Paper	66
Printing a Banner or Other Roll Paper Project	67
Loading Roll Paper	67
Printing a Banner from Windows	72
Printing a Banner from a Macintosh	74
Removing a Printed Banner	75
Printing a Backlit Display	78
Loading Back Light Film	78
Printing a Backlit Display from Windows	79
Printing a Backlit Display on a Macintosh	80
CHAP 4-MANAGING PRINT JOBS AND NETWORK PRINTING	81
Managing Print Jobs with Windows95 or 3.1	81
Using the Spool Manager	82
Using the Status Monitor	84
Managing Print Jobs with WindowsNT	85
Managing Print Jobs on a Macintosh	86
Using EPSON Monitor2	86
Using the Macintosh Status Monitor	87
Network Printing on a PC	89
Connecting to the Printer on WindowsNT4.0 Systems	89
Connecting to the Printer on WindowsNT3.51 Systems	90
Using the Printer Software s Built-in Network Support	91
Network Printing on a Macintosh	93
Assigning a Name to the Printer	94
Setting Up the Printer for AppleTalk	94
CHAP 5-USING YOUR PRINTER WITH DOS	96
Selecting Printer Software for DOS	96
Changing Printer Settings with Default-Setting Mode	98
Entering Default-Setting Mode	98
List of Default-Setting Options	100
Maintaining the Printer	102
Aligning the Print Heads with a DOS Utility	102
Selecting Character Tables	103
International Character Sets	111
Characters Available with the ESC ( ^ Command	112
Using Printer Commands	112
ESC/P 2 Control Codes	113
IBM XL24E Emulation Control Codes	114
CHAP 6-MAINTENANCE AND TRANSPORTATION	115
Cleaning the Print Heads	115
Using the Head Cleaning Utility	116
Using the Control Panel	117
Examining the Nozzle Check Pattern	118
Replacing an Ink Cartridge	118
Removing and Installing an Ink Cartridge	119
Printing in Black Ink with an Empty Color Cartridge	121
Aligning the Print Heads	122
Using the Print Head Alignment Utility	122
Using the Control Panel	123
Cleaning the Printer	124
Transporting the Printer	124
CHAP 7-TROUBLESHOOTING	125
Diagnosing Problems	125
Running a Self Test	126
Printing a Hex Dump	127
Improving Print Quality	128
Solving Printing Problems	132
Fixing Paper Problems	137
Solving Miscellaneous Printout Problems	140
APPENDIX A-USING OPTIONAL INERFACES	142
Using Macintosh Interface Boards	143
Using the PC Serial Interface Board	143
Installing Optional Interfaces	143
APPENDIX B-USING EPSON PLOT!	146
Installing EPSON Plot!	146
Printing with EPSON Plot!	147
APPENDIX C-SPECIFICATIONS	150
Printing	150
Paper	152
Ink Cartridges	154
Mechanical	155
Electrical	155
Environmental	155
Safety Approvals	156
Interfaces	156
GLOSSARY	157