Epson 1520 User Manual - Page 145
Quick Setup, To remove the interface board, first follow steps 1 and 2 in
UPC - 010343813328
View all Epson 1520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
Using Optional Interfaces 7. Connect the proper interface cable to the interface board and to your computer. If the cable has a grounding wire, connect it to one of the screws securing the interface board. 8. Reconnect any other interface cables you disconnected. 9. Make sure the printer is turned off. Then plug in the power cord and turn on the printer. In most cases, the printer automatically detects the interface you're using. However, if you have trouble printing through an installed interface board, you may need to change the printer's I/F (interface) mode setting using default-setting mode. See page 5-3 for instructions. To remove the interface board, first follow steps 1 and 2 in this section. Remove the screws securing the board and carefully pull it out of the internal printer socket. Then replace the interface cover and screws you removed in step 3. Now you can connect your printer using one of the built-in interfaces as described in your Quick Setup booklet. A-4